Некоторые модели принтеров Canon можно сбросить также и с помощью определенных комбинации кнопок. Для использования программ сброса нужно, что бы принтер находился в тестовом режиме, в общем случае- 1 Выключить аппарат (аппарат должен быть подключен к компьютеру). 2 Нажать и удерживать нажатой кнопку Resume обозначенную треугольником в круге. 3 Не отпуская кнопку Resume нажать кнопку ВКЛ (держать обе кнопки нажатыми). 4 Когда загорится индикатор включения — отпустить Resume (ВКЛ держать нажатой) и два раза её нажать, после чего отпустить обе кнопки. Перед использованием программ убедитесь, что ваш принтер не находится в ошибке отличной от ошибки переполнения абсорбера. Для примера приведен сброс Canon MP190: Сброс абсорбера Canon PIXMA MP190. Порядок действий. Сначала надо войти в сервисный режим: 1 Выключить аппарат (аппарат должен быть подключен к компьютеру по USB) 2 Нажать и удерживать нажатой кнопку Resume обозначенную треугольником в круге. 3 Не отпуская кнопку Resume нажать кнопку ВКЛ (держать обе кнопки нажатыми) 4 Когда загорится индикатор включения — отпустить Resume (ВКЛ держать нажатой) и два раза её нажать, после чего отпустить обе кнопки. ![]() Запрошенную информацию найти не удалось. Возможно, будет полезен поиск по сайту. Service tool v1050 - более ранняя версия и менее универсальная, точно работает с MP190, MP240, MP250. 5 Запустить программу. Наличие установленных драйверов не обязательно. Таблица ошибок при проблемах с картриджами: LED Blinking (SFP) Error code (MFP) Error Message on the LCD Solution Ink tanks/Cartridges 4 times U041 No ink Ink has run out. Replace the ink tank and close the cover. Replaced the empty ink tank CLI-8CMYBk, PGI-5Bk 4 times U041 No ink MP170: CHECK INK MP450: Ink has run out. Replace the empty ink cartridge PG-40, PG-50, CL-41, CL-51 4 times U043 Ink tank not installed The following ink tank cannot be recognized. Install the applicable ink tank(s) properly CLI-8CMYBk, PGI-5Bk, BCI-16 7 times U071 Multiple ink tanks of the same color installed Some ink cartridges are not installed. Multiple ink cartridges of the same color installed. Verify ink tank and location CLI-8CMYBk, PGI-5Bk 7 times U072 Ink tank in wrong position Some ink cartridges are not installed. Multiple ink cartridges of the same color installed. Install ink tank(s) in the correct position CLI-8CMYBk, PGI-5Bk 7 times U075 Multiple ink cartridge of the same color installed Some ink cartridges are not installed. Multiple ink cartridges of the same color installed. Verify ink tank and location PG-40, PG-50, CL-41, CL-51 7 times U076 Ink cartridge in the wrong position Some ink cartridges are not installed. Multiple ink cartridges of the same color installed. Verify ink tank and location PG-40, PG-50, CL-41, CL-51 13 times U130 An ink tank which has once been empty is installed The remaining level of the following ink cannot be correctly detected. Press the Stop/Reset button for 5 sec or longer. The error will be cleared and the function to detect the remaining ink amount will be disabled. CLI-8CMYBk, PGI-5Bk Note: If the phenomenon occurs in multiple ink tanks at the same time, the above operation will only be effective for the leftmost ink tank. 13 times U161 Remaining ink amount unknown MP170: CHECK INK MP450: The following ink may have run out. Press the Stop/Reset button for 5 sec or longer. The error will be cleared and the function for detecting the remaining ink amount for the applicable ink cartridge will be disabled. Note: No ink-related errors will be displayed for that ink cartridge thereafter. PG-40, PG-50, CL-41, CL-51 13 times U162 Remaining ink amount unknown MP170: CHECK INK MP450: and ink cartridge that was once empty is installed. Press the Stop/Reset button for 5 sec or longer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
September 2018
Categories |